FEATURES-RFID CARD READER
Reading RFID Cards:
Infinea TAB M with a built-in RFID tag/card reader. The RFID reader
incorporates several RFID format depending on the model of your Infinea TAB
M.
The RFID receiver/transmitter is located on the back of the device, below the
LEDs. Place the RFID tag/card over the receiver/transmitter as shown in the
figure below. Keep the face of the tag/card flat with the receiver/transmitter
as close as possible.
Tips:
Depending on the type of RFID tags/cards being used, it may be necessary for
tags/cards to make direct contact with the surface where the RFID
receiver/transmitter is located for proper reading/writing.
To Next Page
Loading...