Infinite Peripherals INFINEA TAB M - Troubleshooting -Barcode Scanning

!
USER MANUAL |
!
19!
TROUBLESHOOTING –BARCODE SCANNING
If you are having problems scanning barcodes refer to the table below for
possible causes.
Item
Problem
Possible Cause
1
Scanner does not turn On.
* Infinea TAB M battery is too low.
* Infinea TAB M not turned on by software.
* Faulty scan engine.
2
No barcode data returned
during scanning.
* Unreadable barcode.
* Infinea TAB M battery is too low.
* Faulty scan engine.
* Software decode incorrectly.
3
Partial barcode data returned
during scanning.
* Unreadable barcode.
* Faulty scan engine.
* Software decode incorrectly.
4
Unable to perform multi-
scanning.
* Multi-scan mode not enabled.
* Software does not support multi-scans.
5
Unable to hear scanner beep.
* Sound mode not enabled.
* Infinea TAB M battery is too low.
6
Unable to scan certain barcodes
symbols.
* Barcode type is not enabled.
* Barcode type is not supported.
!