8
To power up the chair, flip the main
power switch located on the back of
the base of the chair to ON. Ensure
the electrical cord is connected to a
110V grounded outlet and plugged into
the power cord port located on the
back of the base of the chair.
Main Power Switch
Getting Comfortable
Chair Setup
Take a seat in the chair and take note of where the neck
pillow rests on your neck. Adjust the neck pillow so that
it rests comfortably in the arch of your neck. Do this by
removing it from the velcro, aligning it, and then reattaching
to the velcro once it is in the desired position.
Adjust Pillow
Neck Pillow
Pillow Pad
- When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled
and that the unit be placed in an environment free of dust and moisture.
- To avoid possible damage to product or injury to unsupervised children, always turn off power switch and
unplug massage chair from electrical outlet immediately after use.
CAUTION
To make the massage more intense, remove
the neck pillow and pillow pad cushioning
between you and the massage mechanism
in the seat back. To remove the neck pillow,
simply remove it from the velcro. To remove
the pillow pad, un-zip the zipper.
Increase the Intensity of
your Massage - Manually
Power Cord
Port
Main Power
Switch
AA
To Next Page
Loading...
Need help?
General
