InfiRay TD50L User Manual

 After installing the app, open it.
 If your device has been connected to a mobile device, enable mobile data on it. After the
device accesses the Internet, an update prompt will be displayed automatically. Click
Now to download the latest version immediately or click Later.
 InfiRay Outdoor saves the last connected device automatically. Therefore, once you
open InfiRay Outdoor, it automatically detects an update in the background even when
the scope is not connected to a phone or laptop. If an update is available and the mobile
device accesses the internet, you can download the update first. After the download is
completed, the scope will be connected to the mobile device, the version will be updated
automatically.
 After the update is installed, the device will restart and enter the operation mode.
XXI. Technical Inspection
Perform a technical inspection to check the following items each time before you use the
device:
 Exterior of the device (no crack on the enclosure).
 Lens and eyepiece (no crack, oil, stain, or other sediments)
 Status of the rechargeable battery (fully charged in advance) and electrical contact (no
salinization or oxidation).
XXII. Product Maintenance
The device must be maintained in the following ways at least twice each year:
 Wipe the surface of metal and plastic parts to clear off dust and dirt by using a cotton
cloth. Apply silicone grease if required.
 Use non-greasy organic solvent to wash the electric contact and slot of the battery.
 Check the glass surface of the eyepiece and lens. If necessary, clear off the dust and sand
on the lens (preferably using a non-contact method). Use a specialized wiping tool and
solvent to clean the optical surfaces.

InfiRay TD50L Specifications

General

Objective lens diameter	50 mm
Pixel size	12 μm
Frame rate	50 Hz
Display type	AMOLED
Sensor resolution	384x288 pixels
Digital zoom	4x
Thermal Sensitivity	<40mK
Spectral Range	8-14μm
Display	1.03-inch
Operating Temperature	-20°C to +50°C