InFocus IN5122 User Manual (English)

Other manuals for InFocus IN5122

User Manual97 pages

Panduan Ringkas42 pages

Manual De Usuario97 pages

Quick Start Guide54 pages

Brochure & Specs4 pages

Guide39 pages

Questions and Answers:

S
Susan JohnsonAug 16, 2025
How to fix InFocus IN5122 Projector Smart Stack not working?
- D
  Dr. Michelle YoungAug 16, 2025
  If the Smart Stack feature isn't working, consider these potential causes and solutions: * Ensure both the Main and Sub projectors are receiving AC power. * Verify the RS232 cross cable is correctly connected between the Main and Sub projectors. * Check the STACK menu settings on both the Main and Sub projectors to ensure they are correctly configured. * Examine the signal cable connections, ensuring they are correctly connected and match the port settings in the menu.
M
Marc PhamAug 19, 2025
Why does my InFocus IN5122 ask if I want to turn on the network adapter?
- G
  gordonstephenAug 19, 2025
  This screen appears if the selected network adapter isn't valid. To resolve this, select '[Yes]' to activate the adapter and then proceed to section 1.5. (&14)
B
Bradley MooreAug 22, 2025
How to superimpose images correctly on InFocus IN5122 Projector?
- S
  Stephen WarnerAug 22, 2025
  To correctly superimpose images, adjust the ZOOM ring, VERTICAL and HORIZONTAL adjusters, and the FOCUS ring.
M
Madison MelendezAug 26, 2025
What causes InFocus Projector Main and Sub projectors to not synchronize?
- S
  Steven LeAug 26, 2025
  Synchronization issues between the Main and Sub projectors can occur if the RS232 cable isn't properly connected. Ensure the RS232 cable is correctly connected and restart the Main projector.
A
Amanda FisherAug 28, 2025
Why InFocus Projector images won't superimpose properly?
- B
  Brian AndradeAug 28, 2025
  If you're having trouble superimposing images, even after fine adjustments, try these steps: * Press the AUTO IMAGE button on the remote or use AUTO IMAGE on both projectors. * Adjust HORIZONTAL POSITION and VERTICAL POSITION on both projectors. * Verify that the RESOLUTION setting in the INPUT menu is the same for both the Main and Sub projectors.
A
Andrea WhiteAug 31, 2025
Why STACK menu is not working on InFocus Projector?
- J
  Jeremy LopezAug 31, 2025
  The STACK menu may not function if the projector settings are not set up for a Smart Stack. Check that POWER SAVING MODE in the SETUP menu is ENABLED, COMMUNICATION TYPE under COMMUNICATION in the SERVICE menu is OFF, and STACK LOCK in the SECURITY menu is OFF.
A
aprilcollinsSep 3, 2025
What to do if my InFocus IN5122 Projector says there is no input signal?
- C
  cmartinSep 3, 2025
  If your InFocus Projector displays a 'no input signal' message, first, check the signal input connection. Then, verify the status of the signal source to ensure it is properly sending a signal.
S
Sharon GrahamSep 6, 2025
What to do if the horizontal or vertical frequency of the input signal is not within the specified range in InFocus IN5122 Projector?
- J
  Justin SmithSep 6, 2025
  If the horizontal or vertical frequency of the input signal is not within the specified range, check both your projector's specifications and the signal source specifications to ensure they are compatible.
K
Kari WilliamsSep 9, 2025
What to do if the input signal is not supported on InFocus IN5122 Projector?
- M
  Matthew Miller Jr.Sep 9, 2025
  If your InFocus Projector indicates that the input signal is not supported, verify the projector's specifications and the signal source specifications to ensure compatibility.
C
charlesbarnesSep 12, 2025
What to do if InFocus IN5122 Projector is waiting for an image file?
- C
  Clifford SchmidtSep 12, 2025
  If your InFocus Projector is waiting for an image file, check the hardware connection, projector settings, and network-related settings. You can also try reconnecting using the 'Connect button' of the 'LiveViewer'.

InFocus IN5122 Specifications

General

Matrix size	0.63 \
Number of colors	16.78 million colors
Native aspect ratio	4:3
Projection distance	- m
Projection technology	3LCD
Supported aspect ratios	4:3, 5:4, 16:9, 16:10
Contrast ratio (typical)	2000:1
Screen size compatibility	35.4 - 358 \
Projector native resolution	XGA (1024x768)
Vertical synchronization (max)	120 kHz
Vertical synchronization (min)	50 kHz
Horizontal synchronization (max)	106 kHz
Horizontal synchronization (min)	15 kHz
Focus	Manual
Throw ratio	1.5 - 2.5:1
Zoom capability	Yes
Focal length range	- mm
Vertical lens shift range	-20 - 0 °
Horizontal lens shift range	-20 - 20 %
Lamp type	UHP
Lamp power	245 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	5000 h
3D	-
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1600 x 1200 (UXGA)
RMS rated power	16 W
Number of built-in speakers	2
BNC input ports	5
USB connector type	USB Type-A, USB Type-B
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Cables included	AC, RCA, VGA
Power consumption (standby)	- W
Noise level	32 dB
Certification	UL, c-UL, FCC, CE
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, KOR, NOR, POL, POR, RUS, SWE, TUR
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	Black
Cable lock slot type	Kensington
Operating altitude	0 - 2286 m
Operating temperature (T-T)	5 - 35 °C