InFocus LP725 - Page 29

26
Using the Projector
To raise the projector:
1
Press and hold the elevator button (Figure 22).
2
Raise the projector to the height you want, then release the
button to lock the elevator foot into position.
3
If necessary, use the leveling knob (Figure 23) to adjust the
angle of the projected image.
FIGURE 24
Adjusting the height of the projector
To lower the projector:
1
Press the elevator button.
2
Lower the projector.
3
If necessary, use the leveling knob (Figure 23) to readjust the
angle of the projected image.