11
Connecting an IBM-Compatible Laptop Computer
1
Plug the end of the CableWizard computer cable into the
video connector on your computer.
NOTE: Many laptop computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some laptop computers
are listed in the Appendix of this
manual on page 53.
2
Plug the end of the CableWizard computer cable into the
connector on the CableWizard.
FIGURE 10
Connecting the CableWizard computer cable to an IBM-compatible laptop computer
NOTE: If you don’t want audio or
mouse control, you can use the
CableWizard Lite with your IBM-
compatible computer. CableWiz-
ard Lite is ordered separately. See
“Optional Accessories” on
page 52.
Do you want to play your computer’s audio on the projector?
1
Plug either end of the CableWizard audio cable into the audio
connector on your computer.
2
Plug the other end of the audio cable into the connector
on the CableWizard.
computer cable
To Next Page
Loading...
