InFocus LP725 - Connecting an IBM-Compatible Desktop Computer

13
Connecting an IBM-Compatible Desktop Computer
1
Locate the cable that connects your monitor to your computer.
Unplug it from the computer.
2
Plug the end of the CableWizard computer cable into the
monitor connector on your computer.
3
Plug the end of the computer cable into the connector
on the CableWizard.
FIGURE 12
Connecting the CableWizard computer cable to an IBM-compatible desktop computer
Do you want to display the image on your computer’s monitor as
well as on the projection screen?
1
Plug your monitor’s cable into the connector on the
CableWizard.
Do you want to play your computer’s audio on the projector?
1
Unplug the audio cable, if present, from your computer.
2
Plug either end of the CableWizard audio cable into the audio
connector on your computer.
3
Plug the other end of the audio cable into the connector
on the CableWizard.
computer cable