InFocus LP750 - Connecting a Computer Using a VESA Cable

12
Setting up the Projector
Connecting a Computer Using a VESA cable
The supplied VESA cable connects to the High Density 15-pin
connector (HD 15) on the projector. This input is designated
Computer 2.
1
Locate the cable that connects your monitor to your computer.
Unplug it from the computer.
2
Plug one end of the VESA cable into the video connector on
your computer.
3
Plug the other end of the VESA cable into the HD 15 connec-
tor on the projector.
Do you want to play your computer’s audio on the projector?
1
Unplug the audio cable, if present, from your computer.
2
Plug either end of the CableWizard audio cable into the audio
connector on your computer.
3
Plug the other end of the audio cable into the connector
on the projector.
FIGURE 10
Connecting the VESA computer cable to a computer
audio cable
VESA cable