InFocus Quantum Laser Core Series - Page 54

Level 1
(Sub)
Level 2
(Sub)
Level 3
(Sub)
Level 4
(Sub)
Data Remark
Default Value
Image
Settings
 Color
Settings
BrilliantColor™
By Color
Table
1 ~ 10
Color
Temperature
By Color
Table
Warm 5500K
Standard 6500K
Cool 7500K
Cold 8300K
Color Matching
Color Red
Red / Green /
Blue / Cyan /
Yellow /
Magenta /
White (*)
Hue / R (*)
By Color
Table
-50 ~ 50
1. Hue for Color of Red, Green, Blue, Cyan, Yellow and
Magenta
2. R for Color of White
Saturation / G
(*)
-50 ~ 50
1. Saturation for Color of Red, Green, Blue, Cyan, Yellow and
Magenta
2. G for Color of White
Gain / B (*) -50 ~ 50
1. Gain for Color of Red, Green, Blue, Cyan, Yellow and
Magenta
2. B for Color of White
Reset
Exit
RGB Gain/Bias
Red Gain
By Color
Table
-50 ~ 50
Green Gain -50 ~ 50
Blue Gain -50 ~ 50
Red Bias -50 ~ 50
Green Bias -50 ~ 50
Blue Bias -50 ~ 50
Reset
Exit
Color Space
(Non-HDMI
signal)
@ Auto
RGB
YUV
(HDMI signal)
@ Auto
RGB (0~255)
RGB (16~235)
YUV
Signal
Automatic On Off / On
1. Gray out Signal when source is not VGA
2. On: configure automatically the signal
3. Off: Frequency, Phase, H. Position and V. Position will
appear for tuning and saving the settings
Frequency 0 -10 ~ 10 Gray out this while Automatic is On
Phase by signal 0 ~ 31 Gray out this while Automatic is On
H. Position 0 -5 ~ 5 Gray out this while Automatic is On
V. Position 0 -5 ~ 5 Gray out this while Automatic is On
Brightness
Mode
DynamicBlack
1. Select modes are DynamicBlack, Eco. and Power
2. Power adjusting range from 100% to 50%
3. Power adjusting step by 5%
Eco.
@ (Power
100%)
Power 100% ~
50%
Reset
54