InFocus SP8602 - Optimizing video images; Customizing the projector

25
Optimizing video images
After your video device is connected properly and the image is on the
screen, you can optimize the image using the onscreen menus. For general
information on using the menus, see page 26.
• Adjust the Keystone, Contrast, Brightness, Color, Tint or Sharpness in
the Basic Picture menu (page 27).
• Change the Aspect Ratio. Choose the o
ption that best fits your input
source (page 27).
• Adjust the Color Temperature. Select a listed warmth value (page 28).
• Turn on Overscan to remove noise on the edges of the image (page 28).
Customizing the projector
You can customize the projector for your specific setup and needs. See
page 29 to page 30 for details on these features.
• For rear projection, turn Re
ar Project on in the Setup menu.
• For ceiling mounted projection, tu
rn Ceiling Mount on in the Setup
menu.
• Specify which source the projector che
cks first for active video during
power-up.
• Specify the function
of the Custom key on the remote.
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify appearance of blank
screen and startup screen.
• Specify the language viewed on the menus.