Informa – Speech Dialler
4
Message Acknowledgement
The recipient must always acknowledge the call
made by the Informa in order to terminate its dialling
sequence.
After replaying its two or more messages the
Informa will produce a single tone for one second.
The recipient then has an interval of five seconds to
press the * (star) key on the telephone.
The Informa will repeat its tone for one second and
the user must again press the * key within five
seconds.
The Informa will then sound two short beeps to
indicate that it has received the acknowledgement
and then hang up. Note that it is only possible to
acknowledge the call with a tone-dialling telephone.
2. on-sequential dialling
This function is based on the type of alarm.
If IP1 has been triggered, the Informa will dial the
first telephone number and play the location
message, followed by message 2.
If IP2 has been triggered, the Informa will dial the
second telephone number and play the location
message, followed by message 3.
If IP3 has been triggered, the Informa will dial the
third telephone number and play the location
message, followed by message 4.
If there is no acknowledgement, the Informa will
only attempt seven more times to communicate with
the original telephone number.
To Next Page
Loading...