INFOSEC Nomad Combo C2 - Page 72

INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 05 14 AA 59 203 02
65
Fault mode
Note:
*Fault mode: Errors are caused
by internal circuit errors or
external reasons such as
overheating, output short
circuited and so on.
The PV energy and the utility
can charge the batteries.
Charging by utility and PV energy. (Only
available in 1K/2K/3K model)
Charging by utility. (Only available in 1K/2K/3K
model)
Charging by PV energy.
Fault mode
Note:
*Fault mode: Errors are caused
by internal circuit errors or
external reasons such as
overheating, output short
circuited and so on.
The PV energy and the utility
can charge the batteries.
No charging.
The utility can power the
loads when the unit starts up
without the battery. (Only
available in 4K/5K model with
single operation)
Power from utility
Line Mode
The unit will provide the
output power from the
mains. It will also charge the
battery in line mode.
Charging by utility and PV energy.
Charging by utility.
Battery Mode
The unit will provide output
power from battery and PV
power.
Power from battery and PV energy.
Power from battery only.