Infotec IS2216 - Printing

Launch Guide IS2216 / IS2220 / IS2220D
15
Printing
As printers, the IS 2216, IS 2220 and IS 2220D are very productive. Even in duplex mode, the
IS 2220D runs at 95% of its simplex speed.
The Printer/Scanner option of the IS 2216/20/D comes standard with 100Base-TX / 10BASE-T and
USB2.0. Connectivity across networks is quick and easy. In addition, customers can select from
the following connectivity options:
▪ Wireless LAN Interface (IEEE802.11b)
▪ IEEE1394 FireWire
▪ Bluetooth
▪ IEEE 1284 (parallel port)
The GW board must also be fitted with the Printer/Scanner option
Main Print Controller Specifications
CPU TMPR4955B-300 240MHz
RAM Standard
192MB (Resident 64MB + 128MB additional memory)
Note: Additional 128MB Memory is pre-installed in the
Printer/Scanner Unit
Hard Disk Drive Not available
Standard RPCS, PCL6, PCL5e
PDL
Option Adobe PostScript 3
Continuous Print Speed Max. 16ppm / 20ppm (IS 2216 / 2220) A4/LT:LEF 600dpi
Print Resolution Max. 600 x 600 (dpi)
Standard PCL: 46 fonts : 10 TrueType, 35 Intellifont, 1 bitmap
Fonts
Option PS3: 136 Adobe Type 1 fonts
Standard Ethernet (RJ-45: 100BASE-TX/10BASE-T), USB 2.0
Connectivity
Host
Interface
Option
Wireless LAN Interface (IEEE802.11b)
IEEE1394 x 2 port (6 pin)
Parallel Port IEEE1284
Bluetooth
Note: Only one of above option can be installed.