Launch Guide IS2216 / IS2220 / IS2220D
43
FAX
General Specification
Feature Specification
Circuit:
PSTN, PBX
Compatibility:
ITU-T (CCITT) G3
Resolution:
200x100dpi, 200x200 dpi, 200x400dpi (not A3)
8 x 3.85 l/mm, 8x7.7 l/mm, 8x15.4 l/mm (not A3)
Compression method:
MH, MR, MMR, JBIG
Scanning speed:
1.0 second (200x200/200x100, A4/ 8 1/2”x11” SEF)
2.0 second (200x400dpi, A4 / 8 1/2”x11” SEF)
Number of Pages Scanned:
Short Edge Feed:
30 pages/ minute (200x100dpi, 200x200dpi)
16 pages/ minute (200x400dpi)
Long Edge Feed:
36 pages/ minute (200x100dpi, 200x200dpi)
33 pages/ minute (200x400dpi)
Modem speed:
Standard with Automatic Shift Down:
336000, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400,
12000, 9600, 7200, 4800, 2400 bps
Transmission speed:
G3: Approx.3 seconds (200x100dpi, ITUT #1 chart, A4SEF, MMR, TTI
off, memory transmission)
G3: Approx.2 seconds (200/100dpi, ITUT#1 chart, A4SEF, with JBIG,
TTI off, memory transmission)
SAF memory:
Standard: 2 MB (no SAF memory option available)
Page memory
3 MB (no page memory option available)
SAF memory storage
160 sheets (ITU-T No. 1 chart)
Memory backup:
One hour
Super smoothing:
Standard (Binary)
Stamp:
Option (Available with document feeder)
TTI/RTI:
Standard
CSI:
Standard
Quick dial:
Standard (32 numbers) – 32 out of 150 speed dials can be assigned
Speed dial:
Standard (150 numbers)
Group dial:
Standard (10 groups, Max. 100 numbers per group)
Keystroke program:
No
Redial:
Standard (Last 10 destinations)
AI short protocol:
Standard
Direct fax number entry:
Standard
Dual access:
Standard
To Next Page
Loading...
Need help?
General