Launch Guide IS2216 / IS2220 / IS2220D
25
PRODUCT SPECIFICATIONS
Mainframe Specification
Feature Specification
Scanning Element
Flatbed with moving CCD array image-sensor
Print Process
Twin Laser beam scanning/marking & Electro-photographic
printing.
Dry, dual component toner development
Resolution 600dpi
Gray Scale (per dot) Scanning: 256 levels, Marking: Binary
Warm-up time
Basic: Less than 15 seconds
MFP: Less than 30 seconds
Multiple copy Up to 99
1
st
copy speed
Less than 6.5seconds
(A4 / 8 1/2” x 11” LEF from the standard tray, no R/E)
Multi copy speed
IS 2216: 16cpm (16cpm one to one copying)
IS 2220 / 2220D: 20cpm (18cpm one to one copying)
(A4 / 8 1/2” x 11” LEF, no R/E)
Standard
IS 2216: 250 sheets tray x 1
IS 2220 and IS 2220D 250 sheets tray x 2
100 sheets multi bypass tray for IS 2216, IS 2220 and IS 2220D
Input Capacity
Options
Paper Bank: 500 sheet tray x 1
Paper Bank: 500 sheet tray x 2
Standard
Internal Tray: 250 sheets
Output
Capacity
Options
1 Bin Tray: 100 sheets
Size:
Std Tray: A5 (LEF)- A3(SEF), 51/2” x 81/2”(LEF)-11” x 17”(SEF)
Bypass :A6 (SEF) - A3 (SEF), 5 1/2”x 8 1/2”(SEF) - 11”x 17”(SEF)
Duplex Unit: A5 – A3 (SEF), 8 1/2” x 11 – 11” x 17”(SEF)
Paper size /
weight
Weight:
Standard Tray: 60 to 90 g/m
2
(16 to 24 lbs)
Bypass Tray: 52 to 162 g/m
2
(14 to 42 lbs)
Duplex Tray: 64-90g/ m
2
(20-24 lbs)-IS 2220D only
Memory Standard 16MB
Recovery time Less than 10 seconds
Enlargement 122, 141, 200 %
Reduction 93, 82, 71, 50%
Zoom 50% to 200% in 1% step increments
Image density adjustment Manual or automatic
Interrupt copy Not available
Electronic counter Standard
To Next Page
Loading...
Need help?
General