Ingenico group AXIUM DX8000-BASE-W2 User Manual

6
3. WiFi connection
3.1 Connect DX8000 to the base WiFi
 Power on the base.
 Check the SSID and password from the label on the back of base.
 Click “Settings” menu on DX8000,and then click “Network and Internet”, enter “ Wi-Fi” and select
the base SSID to connect.(step 1~4)
 After that , DX8000 can use the RJ45 network of the base.
Step1 Step2 Step3 Step4
3.2 Web Setting of base
The base can be set from the web.
 Use a computer to connect the base via WiFi.
 The web setting IP of base is 192.168.47.1. Login name is Admin. Password is DX8000BASE.
 User can get the status of base on the status page.

Ingenico group AXIUM DX8000-BASE-W2 Specifications

General

Brand	Ingenico group
Model	AXIUM DX8000-BASE-W2
Category	Touch terminals
Language	English