Ingenico Desk5000 - Activating the Desk5000

11
Activating the Desk5000
User Interaction Desk5000 Screen
Press the ‘Activate Terminal’ option in the
‘Activation menu’. Enter the Activation
code and confirm with ‘OK’.
Enter the activation code again and
confirm with ‘OK’.
Confirm with ‘OK’ to enter the TMS
parameters required to connect with the
Terminal Management System.
Enter the IP address received from your
dealer with the keypad. Use the dot ‘.’
key to enter the mandatory dots in the IP
address. Confirm with ‘OK’.
Enter the port number received from
your dealer with the keypad and confirm with ‘OK’.
Select the correct communication
protocol received from your dealer by
pressing on the correct selection on the
touch screen.
A notification is shown indicating that the
parameters are changed.
Activation code:
Confirmation code:
Enter TMS parameters?
Enter IP-address:
Enter port number:
Select protocol:
HTTP
HTTPS
TMS URL changed