Ingenico Desk5000 - Function Key; Control Panel; Tech Menu; TMS Session

18
Function Key
Pressing the function key will open the menu structure of the terminal.
The menu is divided in 4 categories:
 Control Panel
 Tech Menu
 C-TAP
 Kassa Menu
Control Panel
The Control panel is not accessible for the end user.
Tech Menu
TMS Session
Creates a forced connection with the Terminal Management Server. Only on request of your dealer.
Software Update
Select to update the software of the terminal.
Settings Menu
In this menu user can change the settings of the terminal.
To use this function a password is required to continue. Password should be provided by your
dealer.
 Language menu: Select your language here
 Select network: Choose preferable network Ethernet (SSL)
 Ethernet IP Settings: Choose preferable IP-Mode (DHCP or Static IP)
 Menu Mode: Change layout menu to: List/Icon List/Icon Mosaic
 Header State: Turn on/off Header (Ethernet/Date/Time/Battery)
 Footer State: Turn on/off Footer (F1;F2;F3;F4)
 Change password: Settings Menu Password can be changed here
Information Menu
 RDM Version (Remote Device Management): Select to check software
 Terminal Info: Select to check serial number and detailed terminal information
 Ethernet Info: Select to check Ethernet information
 Printer Status: Select to check the printer status