icmp • 900011533 R11 000 02/1613 10/20
Copyright © 2013 Ingenico
All rights reserved
4. Installation and connection
For following part of the user guide, the icmp is named Terminal while the device which
may be paired with icmp (tablet, smartphone, PDA) is name Third Party Device.
4.1. Functional description
The Terminal is a secure EMV Chip & PIN mobile payment pinpad to be used via Bluetooth
with third party devices. The Terminal allows merchants to convert a smartphone or a
tablet into a powerful & secure POS solution.
4.2. Charging Terminal
• Before using the terminal for the first time, it requires to be charged for about 3
hours via a computer USB port power output of 450 mA.
• Further full charging of the terminal battery requires via a computer USB port is
about 3 hours.
• Charge the terminal using the supplied USB cable or the appropriate Ingenico
power supply (provided separately as an accessory).
To Next Page
Loading...
