Ingenico iCT Series - III-3. SNAPSHOT BALANCES; III-4. RUNNING TOTALS

III-3. SNAPSHOT BALANCES
The supervisor can perform this operation at any time to print the totals
without resetting the totals.
STEP ACTION DISPLAY
1
Press F1 for MAIN
MENU…
2
Select BATCH (use arrow
down key) and press
ENTER.
3
Select SNAPSHOT by
pressing arrow down key
once then press ENTER
key.
Printing SNAPSHOT
receipt…
Tear-off paper.
III-4. RUNNING TOTALS
The supervisor should perform this operation at the end of each shift, so
the totals will be reset and a fresh account starts for the next shift.
STEP ACTION DISPLAY
1
Press F1 for MAIN
MENU…
2
Select BATCH (use arrow
down key) and press
ENTER.
3
Select RUNNING by
pressing arrow down key
twice then press ENTER
key.
Printing receipt…
Tear-off paper.