Ingenico iCT Series - III-5. PASSWORD CHANGE

III-5. PASSWORD CHANGE
The supervisor can perform this operation at any time to change the
merchant password.
STEP ACTION DISPLAY
1
Press F1 for MAIN
MENU…
2
Select FUNCTION (use
arrow down key) and press
ENTER.
3
Enter Merchant Function
90.
Then press ENTER key.
4
Key-in OLD password.
Example: 1111
Then press ENTER key.
5
Key-in NEW password.
example: 2222
Then press ENTER key.
6
Key-in NEW password
again.
Then press ENTER key.
7
Transaction accepted.
Password has been
changed.