Ingenico iCT220 Quick Start Guide

2
Setting Up Your Terminal
Your terminal needs power and either a phone line or an internet connection. Both the power and the
communication cables plug into the “magic box” at the end of the terminal’s cord.
Communications Cord
If you are using a phone line, locate the phone
line port on the magic box. Make sure you plug
your phone line into the port marked with a
picture of a phone handset, and not into the
RS232 or ETH port.
If you are using an internet connection, plug
your Ethernet cable into the port marked
“ETH.”

Ingenico iCT220 Specifications

General

Weight	325 g
Display	128 x 64 pixels
Connectivity	Ethernet
Card Readers	Magnetic stripe
Security	PCI PTS 3.x certified
Processor	ARM9 32-bit RISC processor