3
Power Cord
Next, assemble the two parts of the power
cord. The small round connector on one end of
the cord plugs into the terminal’s magic box
using a port marked with a small lightning bolt
symbol.
Plug the other end of the power cord into a wall
socket. Make sure to use a socket that is not
operated by a light switch—the terminal needs
to stay on all night so it can automatically settle
the batch. The terminal will chirp and begin
starting up once it is plugged in. Always use the
cord that came with your terminal. Never try to
use this terminal with a power cord from a
different model. Using unsupported power
cables can permanently damage the terminal.
To Next Page
Loading...
