Ingenico iCT250 Read Me Next

Chip and signature payments
14.33
10/09/2015
TU2 .01.19
Key in Amount
£0.00
and then press ENTER
14.33
10/09/2015
TU2 .01.19
14
1 At the ‘ready’ prompt, key in
the amount.
Press the button.
2
Your card machine will prompt you to
take a chip and signature payment if
the card is set-up to do so. Ask your
customer to insert their card into the
card machine (or separate customer
PIN pad if you have one).
3
When prompted, tear o the
merchant receipt and obtain
cardholder signature.
Chip and PIN should be used whenever possible, as it’s the most secure way to take a payment, but some cards are
set up to request a signature rather than a PIN during a transaction. This may happen on foreign issued cards, or if the
cardholder has a disability or other reason that they cannot use a PIN.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter