Important safety instructions provided by the
manufacturer, Ingenico Ltd.
34
Important safety instructions
Upon receipt of your terminal you
should check for signs of tampering of
the equipment. It is strongly advised
that these checks are performed
regularly after receipt. You should
check, for example: that the keypad
is rmly in place; that there is no
evidence of unusual wires that have
been connected to any ports on your
terminal or associated equipment,
the chip card reader, or any other part
of your terminal. Such checks would
provide warning of any unauthorised
modications to your terminal, and
other suspicious behaviour
of individuals that have access to
your terminal.
Your terminal detects any ‘tampered
state’. In this state the terminal will
repeatedly ash the message ‘Alert
Irruption!’ and further use of the
terminal will not be possible. If you
observe the ‘Alert Irruption!’ message,
you should contact the terminal
helpdesk immediately.
You are strongly advised to ensure
that privileged access to your terminal
is only granted to sta that have
been independently veried as being
trustworthy.
CAUTION: Never ask the customer
to divulge their PIN code. Customers
should be advised to ensure that they
are not being overlooked when entering
their PIN code.
General Safety Information
• Do read and understand the
instructions before using the equipment
• Do not expose this apparatus to rain
or moisture. For indoor use only
• Do not remove any screws or
non-operator accessible covers
• Do not insert any metallic objects
• Do not stack telephone splitters
• Do not allow liquid to spill into
cabinet openings
• Do not allow anything to rest on the
power or telecom cords and ensure all
cables are routed to prevent damage or
accidental contact
• Do not continue to operate the
equipment if you are in any doubt
about it working normally, or if it is
damaged in any way. Switch o then
withdraw the mains plug and consult
your service agent
To Next Page
Loading...
Need help?
General
