Ingenico iCT250 Read Me Next

Changing the till roll
26
1 Lift the catch, or ap, at the back
of the card machine and then pull
it backwards away from your
card machine to open the paper
compartment. Remove the old till roll.
2 Peel away the end of the new roll.
Leaving the end free, hold the till
roll and carefully place into the
printer compartment.
3 Holding the free end of the paper and
your card machine, close the printer
cover carefully and push rmly (on
both corners of the catch) until it locks.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter