Ingenico Link2500 User Manual

7
Installing the battery
 The power adapter must not be used during the installation of the battery
 Turn your terminal and unclip the battery trapdoor by pushing on the button as shown on the
picture
 Disengage the trapdoor
 Take the battery pack included in the box
 Place the battery pack in its compartment
 Plug the battery pack connector according to the connector locating system
 Clip the trapdoor until the terminal is locked

Ingenico Link2500 Specifications

General

Security	PCI PTS 5.x certified
Operating System	Telium TETRA
Memory	128 MB Flash, 128 MB RAM
Connectivity	Wi-Fi, Bluetooth
Contactless Technology	NFC
Card Reader	Magstripe, EMV Chip
Payment Methods	Contactless, Chip & PIN, Magstripe
Battery	Rechargeable Li-ion battery