Connecting your Move 5000 to Wi-Fi
To connect to Wi-Fi:
1. Press the F3 key on the home screen.
2.
Select Control panel from the menu.
3.
Then select Terminal settings.
4.
Then select Comm means.
5.
In the Comms menu, select Wi-Fi.
6. Select your provider from the list provided.
7. The Wi-Fi icon will turn orange, indicating that a Wi-Fi connection is in progress.
Then it should turn green.
If the Wi-Fi icon stays white then the password may not be correct and you should
recheck this. If it stays orange, the IPaddress has not been set/received from the
network. Ensure that your Wi-Fi is working on other devices, and try again.
Setting up the Mobile Connection
The SIMis already installed in your Move 5000, and a signal and network should be
automatically found. You should see 3G appear at the top of the screen. You may
choose to select a specific network, as described below.
Selecting a Network
You can manually select a specific provider for your Move 5000.
1.
Press Menu twice, and select Supervisor from the menu.
2. Enter your password. (See "Supervisor Menu and Password" on the next page for
more details.)
3.
Select Config.
6
valitor.com
To Next Page
Loading...
