Ingenico PAYZONE iCT250 - Connecting Power and Network

Let’s get you started
Step 1 - Plugging in the power supply
Plug the power supply into the junction box in the circular connection, as
per below;
Step 2 - Establish how the terminal needs to be set up (Phone Line or Broadband)
Decide how you would like to use the machine, either through the phone
line or broadband?
Step 3 - Connect the correct connection method
Phone Line
Connect the phone line into the below port (labelled with ‘phone symbol
and IN’on the junction box), shown below.
Power Supply
Phone Line