Ingenico PAYZONE iCT250 - Terminal Installation Steps

Broadband
Connect the Ethernet cable into the broadband router and the other end into
the port (labelled ‘ETH’), shown below.
Step 4 - Going through the installation mode steps
Phone Line Connection
Does the Tel. Line have
Call Waiting or 1571?
Enter=Yes Clear=No
Press ENTER on
Telephone(PPP).
Is there call waiting or
1571?
Type in the *6 digit
Payzone Merchant
number and press ENTER.
Press ENTER.
Is there a dial prefix on
the line?
The terminal will then
dial GEMS.
Terminal Installation
Plug in Phone Line
and then press ENTER
Terminal Installation
Key In Merchant No.
(6 digit number)
and then press ENTER
Dial Prefix Required?
Enter=Yes Clear=No
Dialing GEMS
Tel: 08431 786527
DPP 100 Prefix NONE
Please Wait…
1
4
2
5
3
6
Ethernet port
Connection method
Telephone(PPP)
Local Network
Once this has been completed the terminal will display the READY prompt
showing the merchant number. Please try a test transaction of 1p to ensure
the terminal is fully installed.
*6 digit Payzone Merchant number can be found on your ‘Payzone Welcome’
email.