Ingenico PAYZONE iCT250 User Manual

Broadband Connection
Dialing GEMS
Tel: 08431 786527
DPP 100 Prefix NONE
Please Wait…
Press ENTER on local
network.
The terminal will then
dial GEMS.
Press ENTER.
Type in the *6 digit
Payzone Merchant
number and press ENTER.
Terminal Installation
Plug in Newtork
and then press ENTER
Terminal Installation
Key In Merchant No.
(6 digit number)
and then press ENTER
1
4
2 3
Connection method
Telephone(PPP)
Local Network
Once this has been completed the terminal will display the READY prompt
showing the merchant number. Please try a test transaction of 1p to ensure
the terminal is fully installed.
*6 digit Payzone Merchant number can be found on your ‘Payzone Welcome’
email.

Ingenico PAYZONE iCT250 Specifications

General

Connectivity	Ethernet
Printer	Integrated thermal printer
Operating Temperature	0°C to +45°C
Storage Temperature	-20°C to 60°C
Payment Methods	Credit cards, Debit cards, contactless
Card Reader	supports chip and contactless cards
Humidity	10% to 90% non-condensing