Ingersoll-Rand SSR M11 User Manual

SSR M4 M5,5
M7,5 M11
OPERATION AND MAINTENANCE MANUAL
This manual contains
important safety information
and must be made available to
personnel who operate and
maintain this machine.
2161200M11 –>
2141800M7,5 –>
2121300M5,5 –>
2101200M4 –>SERIAL No :
SERIAL No :
SERIAL No :
SERIAL No :
C.C.N. : 89270334 GB
DATE : NOVEMBER 2002

Ingersoll-Rand SSR M11 Specifications

General

Model	SSR M11
Type	Rotary Screw Air Compressor
Manufacturer	Ingersoll-Rand
Power Source	Electric
Cooling Method	Air-Cooled
Power Output	11 kW
Voltage	460V
Phase	Three Phase
Tank Size	Not Applicable

Summary

Safety

Compressed Air Safety

Precautions and hazards associated with handling compressed air.

Material Hazards

Information on potentially hazardous substances used in the machine.

Electrical Safety

Precautions for working with the compressor's electrical system.

General Information

General Operation Overview

Installation and Handling

Location in Plant

Discharge Piping

Electrical Data and Connections

Operating Instructions

Pre-Start Checks and Procedures

Steps to perform before starting the compressor, including safety checks.

Starting and Stopping the Compressor

Instructions for initiating and halting compressor operation.

Maintenance

Maintenance Schedule and Routine Tasks

Periodic tasks and intervals for maintaining the compressor.

Coolant Change Procedure

Filter and Separator Element Replacement

Pressure Switch Adjustment and Checking

How to check and adjust the pressure switch settings.

Pulley Alignment

Drive Belt Installation and Tension

Belt Tension and Bearing Maintenance

Fault Finding

Options - Air Dryer

Dryer Troubleshooting

Common issues, causes, and corrective actions for the air dryer.

Dryer Hazards and Safety