EasyManua.ls Logo

Ingersoll-Rand SSR M11 - Condensate Disposal; Coolant Disposal

Ingersoll-Rand SSR M11
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY
9
M4 M5,5 M7,5 M11
Condensate disposal
Condensate cannot be discharged into fresh/surface water drains.
In some regions compressor condensate containing ULTRA
COOLANT can be fed directly into a drainage system that has
downstream sewerage treatment.
As waste water regulations vary by country and region it is the
responsibility of the user to establish the limitations and regulations in
their particular area. Ingersoll–Rand and its associated distributors are
happy to advise and assist in these matters.
Coolant disposal
Steps to be taken in the case of spillage: Soak up with a suitable
absorbent material, then sweep into a plastic bag for disposal.
Burn in an approved incinerator, or according to local area or
country regulations.
For further information, consult Material Data Sheets ACGP 011/96
(ULTRA COOLANT) and IRACA145 (food grade coolant).

Related product manuals