3 8 IDS404 INSTALLER MANUAL NO. 700-277-02A ISSUED SEPT 2004 VER 1.02
IDS404 INSTALLER MANUAL
! To dial a “#” program a [12] into the location.
! To create a 12 second pause in the number program a [14] into
the location.
! To create a 4 second pause in the number program a [15] into
the location.
! To terminate a telephone number, program a [0] (not 10) into
the location immediately following the last digit of the
telephone number.
76-56NOITACOL devreseR
38-86NOITACOLrebmuNenohpeleTyramirP
.oN.coL86960717273747576777879708182838
These locations contain the primary telephone number, which may
be up to sixteen digits long. A four second delay can be
programmed at any point by entering a value of [15] in the
respective location.
EXAMPLE
Assuming a phone number consisting of an area code 031, a 4
second pause and a phone number of 705 1373
noitacoL demmargorPeulaV
8601edocaerafotigidts1-
963 edocaerafotigiddn2-
071 edocaerafotigiddr3-
1751yaleddnoces4-
277 rebmunenohpfotigidts1-
3701rebmunenohpfotigiddn2-
475 rebmunenohpfotigiddr3-
571 rebmunenohpfotigidht4-
673 rebmunenohpfotigidht5-
777 rebmunenohpfotigidht6-
873 rebmunenohpfotigidht7-
970 rebmunetanimret-