8
Add device in AP mode:
● Plug the device in the socket and
make sure that the device is in the AP
Configuration State (the LED symbol
is flashing slowly, interval flashing
1500ms).
● Click “ ” to enter device adding
interface,click “Confirm indicator
slowly blink” and then select Wi-Fi
network, enter Wi-Fi password,click
“confirm” to enter connection process.
● Press “Connect now” and it will go to
your WLAN Setting in your smart
phone, select the “SmartLife-XXXX”
to directly connect to the router without
putting in password.
● Go back to app to enter into the automatic
connection interface.
WIFI
To Next Page
Loading...
Need help?
General
