Inkbird ITC-308-WIFI User Manual

12
6.1.2 Button Function in Setting Mode
When the controller is working normally,
press the SET button for 2 seconds to enter
the setting mode. The PV digital tube
shows the first menu code“TS”, SV shows
the corresponding setting value. Press
SET button to scroll down the menu item
and save the parameters of the previous
menu item. Press " "or " "button to
change the current setting value. If in the
setting state, there is no operation within
30 seconds or long press "SET" button for
2 seconds, it will exit and save the setting
state and return to normal operation mode.
WIFI

Inkbird ITC-308-WIFI Specifications

General

Brand	Inkbird
Model	ITC-308-WIFI
Category	Controller
Language	English