11
The WalkAide is designed for single-handed application
and removal (Figure 4). It may take a bit of practice to
develop a routine that works best for each person. The
WalkAide is applied directly to the leg and can be easily
worn under most clothing.
The clinician will find the optimal stimulation areas and
set up the placements of the electrodes on the initial visit.
The electrode red and black locators will be placed on the
inside of the cuff and will not need to be adjusted within
the cuff afterwards. The cuff must be positioned on the
leg correctly to achieve effective and efficient stimulation.
4.0
General Operating Instructions
Figure 4: One-handed application
Applying Tightening
To Next Page
Loading...