Innovative Neutronics WalkAide - Instructions for Exercise Mode; Exercise Mode Usage Guidelines; Starting Exercise Mode Procedure

15
4.4 Instructions for Exercise Mode
The Exercise Mode is
NOT to be used while walking. It is designed
to apply repeated stimulation to the leg while at rest for a period
of time determined by the clinician.
1. Assume a comfortable sitting position and apply the
WalkAide unit.
2. Adjust the Intensity Knob (1) and then press the Exercise
Button (3) for more than 3 seconds (Figure 7). An amber light
(5) will flash on the top of the WalkAide unit and will beep.
This will start the intermittent stimulation.
Figure 7: Using the Exercise Mode
Intensity
Knob (1)
Exercise Button (3)
Amber blinking
light indicates the
presence of STIM (5)