Need help?Do you have a question about the Inovance AM522-0808TN and is the answer not in the manual?
General| Model | AM522-0808TN |
|---|---|
| Series | AM500 |
| Input Voltage | 24 VDC |
| Output Channels | 8 |
| Output Voltage | 24 VDC |
| Number of Inputs | 8 |
| Number of Outputs | 8 |
| Input Type | Digital |
| Storage Temperature | -20°C to 70°C |
| Protection Class | IP20 |
| Communication Protocol | CANopen, Modbus |
| Communication ports | RS232, RS485 |
| Communication Interface | RS232, RS485 |
| Humidity | 5% to 95% (non-condensing) |
| Programming Language | IEC 61131-3 (LD, FBD, ST, SFC) |
Essential guidelines for safe operation, handling, and definitions of safety levels (DANGER, WARNING, CAUTION).
Critical safety notice requiring installation by professionals with electrical knowledge.
Warnings and advice to ensure safe installation practices, including environment and equipment compatibility.
Hazards associated with incorrect wiring, grounding, and touching live circuits.
Dangers and warnings before, during, and after powering on the PLC.
Dangers and warnings for equipment repair procedures, including power disconnection and residual voltage.
Covers key items like program capacity, EtherCAT axes, axis control performance, and programming platform.
Details on EtherCAT, Ethernet, RS485, and USB communication features and capabilities.
Covers high-speed I/O, program/firmware upgrades, dimensions, weight, and IP rating.
Technical details for digital input terminals, including type, mode, voltage class, and response time.
Technical details for digital output terminals, including output type, load ratings, and protection.
Specifies environmental conditions for PLC installation, including gas, dust, altitude, and immunity levels.
Details operating humidity limits and notes on installing ventilation for temperature control.
Covers installation orientation, derating for horizontal mounting, and limits for non-horizontal installation.
Diagram and table showing terminal connections for input and output signals.
Detailed technical specifications for EtherCAT communication, including protocol, layer, and distance.
Details on RS485 bus topology, termination resistors, node connections, and interference avoidance.
Procedure for loading user programs using an SD card into the PLC.
To Next Page