Need help?Do you have a question about the Inovance AM400 Series and is the answer not in the manual?
General| Series | AM400 |
|---|---|
| Category | Controller |
| Protection Class | IP20 |
| Programming Language | Ladder Diagram (LD), Function Block Diagram (FBD), Instruction List (IL), Structured Text (ST), Sequential Function Chart (SFC) |
| Communication Ports | RS232, RS485, Ethernet |
| Analog Input Channels | Up to 16 |
| Analog Output Channels | Up to 8 |
| Digital Outputs | Transistor, Relay |
| Analog Inputs | Voltage/Current (depending on model) |
| Analog Outputs | 0-10 V, 4-20 mA |
| High-speed Counters | Up to 100 kHz |
| Humidity | 5% to 95% (non-condensing) |
General precautions for installing, using, and maintaining the equipment safely.
Defines warning and caution levels and associated risks for user safety.
Safety considerations during the design phase of the control system, including circuit protection.
Safety precautions and requirements for installing the PLC equipment and modules.
Safety guidelines and precautions for wiring the PLC system and its components.
Safety guidelines for operating and maintaining the PLC equipment.
Details EtherCAT bus specifications and wiring.
Explains CANopen/CANlink bus topology, interfaces, and wiring.
Describes RS485 port connection and pin definition.
To Next Page