To Next PageTo Next Page
Need help?Do you have a question about the Inovance AC800 Series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Protection Class | IP20 |
| Series | AC800 Series |
| Control Mode | Vector Control, V/F Control |
| Braking Unit | Built-in or External (Optional) |
| Protection Functions | Overcurrent, overvoltage, undervoltage, overheat, overload, short circuit |
| CPU Type | 32-bit DSP |
| Communication Ports | RS485 |
| Operating Temperature | -10°C ~ +50°C (derating above 40°C) |
Lists accessories included with the AC800 controller.
Lists associated documentation for the AC800 series controller.
Highlights the key features and capabilities of the AC800 controller.
Defines safety terms like Danger, Warning, and Caution for user guidance.
Provides crucial safety advice for unpacking and handling the equipment.
Details the naming convention and identification of AC800 controller models.
Describes the physical layout and external features of the controller.
Details the various components and their operational roles.
Explains the function and meaning of the controller's LED status indicators.
Describes the location and operation of the controller's power button.
Details the external expansion card slot for adding functionality.
Describes the controller's display screen and control buttons.
Outlines the various input/output and communication interfaces on the controller.
Lists available spare parts and optional accessories for the controller.
Lists the fundamental technical specifications for various AC800 controller models.
Details the operating, transport, and storage environmental parameters according to IEC standards.
Outlines the electromagnetic compatibility (EMC) standards and performance criteria for the controller.
Specifies conditions for installing the controller, including environment and space.
Lists essential safety measures to follow during controller installation, including handling hot components.
Describes how to install the controller using rear or side earhooks.
General guidelines and precautions for wiring the controller.
Explains proper grounding techniques for electrical safety and signal integrity.
Covers safety during power-up and the PLC startup process.
Describes controller behavior during power interruptions and shutdown.
Guides on acquiring the InoProShop software and necessary documentation.
Details system requirements and installation steps for the programming software.
Outlines regular checks for power, environment, and wiring to ensure optimal performance.
Explains the function and replacement procedure for the controller's real-time clock battery.
Lists BIOS startup codes and error messages for troubleshooting.
