Inovance AM600-1600END User Manual

AM600 Series PLC Hardware Manual
User Guide
A00
Data code 19010853
Copyright Shenzhen Inovance Technology Co., Ltd.
Shenzhen Inovance Technology Co., Ltd.
Add.: Building E, Hongwei Industry Park, Liuxian Road, Baocheng No. 70 Zone, Bao’an District, Shenzhen
Tel: +86-755-2979 9595
Fax: +86-755-2961 9897
Service Hotline: 400-777-1260
http: //www.inovance.com
Suzhou Inovance Technology Co., Ltd.
Add.: No. 16 Youxiang Road, Yuexi Town, Wuzhong District, Suzhou 215104, P.R. China
Tel: +86-512-6637 6666
Fax: +86-512-6285 6720
Service Hotline: 400-777-1260
http: //www.inovance.com
AM600 Series
PLC Hardware Manual

Inovance AM600-1600END Specifications

General

Brand	Inovance
Model	AM600-1600END
Category	Controller
Language	English

Summary

Chapter 1 Safety Instructions

Before You Start

Important initial steps and information before operating the PLC.

Safety Instructions

General safety guidelines and precautions for using the PLC equipment.

Chapter 2 Product Information

2.1.1 Functions of the CPU Module

Describes the capabilities and communication ports of various CPU modules.

Chapter 3 Specifications

3.2 Hardware Performance Indicators of the CPU Module

Details basic specifications, interfaces, and soft elements of the CPU module.

3.3 Specifications of the Power Module

Outlines the basic specifications and interface description of the power module.

3.5 Remote Expansion Module (EtherCAT)

Specifies EtherCAT communication modules, I/O modules, counting, and positioning modules.

3.6 Remote Expansion Module (Profibus-DP)

3.7 Remote Expansion Module (CANopen)

Chapter 4 Installation

4.2 Installation Method

4.5 Replacing Modules

Chapter 5 Wiring

5.3 Wiring of the Power Module

5.4 High-speed I/O Wiring of the CPU Module

5.5 Communication Wiring of the CPU Module

Covers cable connection requirements for various communication protocols.

5.6 Wiring of Local Expansion Modules

5.7 Wiring of Remote Expansion Modules (EtherCAT)

Chapter 7 Running and Maintenance

7.1 Running and Stop

Explains how to start and stop the PLC system.

7.2 Indicators and MFK Button

7.3 Routine Maintenance

Outlines daily and periodic spot check procedures for maintenance.

7.4 CPU Module LED Display

Explains how CPU module LEDs display fault codes and modes.