Inovance AC800 Series - Ethernet Cabling

-32-
5 Wiring
AC800 Series Intelligent Machine Controller Hardware User Guide
5.5.2 Ethernet Cabling
Networking diagram
With the Ethernet port, the controller can be connected point-to-point with devices such as a computer
and HMI through an Ethernet cable.
&UIFSOFUDBCMF
Figure 5-13 Connection between controller and PC
The controller can also be connected to a hub or switch, which is further connected with other network
devices, through an Ethernet cable to achieve multi-point connection.
&UIFSOFUDBCMF
1$
).*
-"/
&UIFSOFUDBCMF
&UIFSOFUDBCMF
1$
).*
-" /
1$
4XUJDI
Figure 5 -14 Connection between CPU module and other devices through a switch