5
Operation and Maintenance
=GXTOT
◆
Maintenance & inspection must be carried out by personnel who have the necessary
electrical training and experience.
◆
Do not touch the terminals while the power is on. Failure to comply may result in
electric shock or malfunction.
◆
Disconnect all external power supplies of the system before cleaning the module or re-
tightening screws on the terminal block or screws of the connector. Failure to comply
may result in electric shock.
◆
Disconnect all external power supplies of the system before removing the module or
connecting/removing the communication wirings. Failure to comply may result in
electric shock or malfunction.
◆
RUN/STOP operation.
◆
Disconnect the power supply before installing/removing the extension card.
Disposal
◆
Treat scrapped module as industrial waste. Dispose the battery according to local laws
and regulations.
To Next Page
Loading...
Need help?
General
