Inovance MD200 - Page 50

5 Parameter Table
- 49 -
Para. No. Para. Name Setting Range Default Comms. Address
A1-06 Selection of VDI active state
00000 to 11111
VDI2:
0: Inactive
1: Active
VDI1:
0: Inactive
1: Active
VDI3:
0: Inactive
1: Active
VDI5:
0: Inactive
1: Active
VDI4:
0: Inactive
1: Active
00000 0xA106/0x4106
A1-07
Function selection for AI used as
DI
Same as F4-00 0 0xA107/0x4107
A1-10
Active state selection for AI used
as DI
AI
0: High level valid
1: Low level valid
0 0xA10A/0x410A
A1-11 VDO1 function selection
0: Connected with DIx internally
1 to 41: same as F5-04
0 0xA10B/0x410B
A1-12 VDO2 function selection
0: Connected with DIx internally
1 to 41: same as F5-04
0 0xA10C/0x410C
A1-13 VDO3 function selection
0: Connected with DIx internally
1 to 41: same as F5-04
0 0xA10D/0x410D
A1-14 VDO4 function selection
0: Connected with DIx internally
1 to 41: same as F5-04
0 0xA10E/0x410E
A1-15 VDO5 function selection
0: Connected with DIx internally
1 to 41: same as F5-04
0 0xA10F/0x410F
A1-16 VDO1 output delay 0.0 to 3600.0s 0.0s 0xA110/0x4110
A1-17 VDO2 output delay 0.0 to 3600.0s 0.0s 0xA111/0x4111
A1-18 VDO3 output delay 0.0 to 3600.0s 0.0s 0xA112/0x4112
A1-19 VDO4 output delay 0.0 to 3600.0s 0.0s 0xA113/0x4113
A1-20 VDO5 output delay 0.0 to 3600.0s 0.0s 0xA114/0x4114