Inovance MD330H - Page 99

Function Code Table
MD380 User Manual
- 98 -
Function
Code
Parameter Name
Setting Range
Default Property
F7-05 LED display stop parameters
0000–FFFF
Bit00: Set frequency (Hz)
Bit01: Bus voltage (V)
Bit02: DI input status
Bit03: DO output status
Bit04: AI1 voltage (V)
Bit05: AI2 voltage (V)
Bit06: AI3 voltage (V)
Bit07: Count value
Bit08: Length value
Bit09: PLC stage
Bit10: Load speed
Bit11: PID setting
Bit12: Pulse setting frequency
(kHz)
33 ☆
F7-06
Load speed display
coefcient
0.0001–6.5000
1.0000 ☆
F7-07
Heatsink temperature of AC
drive IGBT
0.0–100.0°C
- ●
F7-08 Temporary software version
-
- ●
F7-09 Accumulative running time
0–65535 h
- ●
F7-10 Product number
-
- ●
F7-11 Software version
-
- ●
F7-12
Number of decimal places
for load speed display
0: 0 decimal place
1: 1 decimal place
2: 2 decimal places
3: 3 decimal places
1 ☆
F7-13 Accumulative power-on time
0–65535 h
0 h ●
F7-14
Accumulative power
consumption
0–65535 kWh
- ●
Group F8: Auxiliary Functions
F8-00 JOG running frequency
0.00 Hz to maximum frequency
2.00 Hz ☆
F8-01 JOG acceleration time
0.0–6500.0s
20.0s ☆
F8-02 JOG deceleration time
0.0–6500.0s
20.0s ☆
F8-03 Acceleration time 2
0.0–6500.0s
Model
dependent
☆
F8-04 Deceleration time 2
0.0–6500.0s
Model
dependent
☆