2 Installation and Setting
- 6 -
5) State indicators
Table 2-6 Description of MD38CAN2 state indicators
Indicator State Description
PWR
(red)
ON Power-on normal
OFF
Power-on abnormal (check whether the installation is
correct)
ERR
(red)
ON Internal AC drive communication timeout
Blinking quickly CANopen address setting incorrect
Blinking twice CANopen emergency message indicating AC drive fault
RUN
(green)
ON CANopen "Operational"
Blinking CANopen "Pre-Operational"
OFF CANopen "Stopped"
To Next Page
Loading...