Inovance MD500T110G-INT - Simple EMC Filter

9. Technical Data
- 267 -
9
● Simple EMC Filter
A simple EMC lter is installed to prevent the surrounding interference and prevent
the interference from the AC drive during running.
Connect the simple EMC filter to ground reliably and ensure that the length of the
cable connecting the drive and the lter is less than 30 cm.
–
Selection
MD500 Model Simple EMC lter
MD500T18.5GB-INT DL65EB1/10
MD500T22GB-INT
MD500T30GB-INT
MD500T37GB-INT
DL-120EB1/10
MD500T45GB-INT
MD500T55GB-INT
DL-180EB1/10
MD500T75GB-INT
MD500T90G-INT Unavailable
MD500T110G-INT
MD500T132G-INT
MD500T160G-INT
–
Mounting Dimensions
6.5 ± 0.2
4
.5 ± 0.2
Mounting length: 80 ± 0.2
120 ± 2
Length: 157 ± 3
100 ± 2
Mounting width: 115 ± 0.5
Width
: 130 ± 2
13.75 ± 1
55 ±
1
M4
M6 x 6
17 ± 1
35 ± 1
Height: 50 ± 2
Unit: mm
Simple EMC
Filter Model
Overall Dimensions
(Length x Width x Height)
Mounting Dimensions
(Mounting Length x Mounting Width)
(mm)
DL-15EB1/10 157 x 130 x 50 80 x 115
DL-35EB1/10 218 x 140 x 80 184 x 112
DL-65EB1/10 218 x 140 x 80 184 x 112
DL-120EB1/10 334 x 185 x 90 304 x 155
DL-180EB1/10 388 x 220 x 100 354 x 190