Need help?Do you have a question about the Inovance MD310 T5.5B and is the answer not in the manual?
General| Rated Power | 5.5 kW |
|---|---|
| Output Current | 11 A |
| Frequency Range | 0 - 400 Hz |
| Cooling Method | Forced air cooling |
| Storage Temperature | -20°C to +60°C |
| Control Mode | V/F control, Sensorless vector control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overheat, overload, short circuit |
| Communication Interface | RS485, Modbus |
| Ambient Temperature | -10°C to +40°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000 m |
| Input Voltage | 3-phase 380V AC |
Guidelines for safe electrical practices when working with the AC drive.
Safety considerations for system design, installation, and personnel.
Precautions for safe electrical installation and risks of electric shock.
Explains model designation and nameplate information.
Provides detailed technical specifications for various drive models.
Illustrates wiring connections and describes terminals.
Specifies wire gauge, torque, and EMC jumper settings.
Details requirements for connecting the drive to different grid systems.
Explains the drive's control logic and timing diagrams.
Outlines a step-by-step procedure for setting up the AC drive.
Introduces keypad functions and basic parameter setup.
Covers DI/DO, startup frequency, S-curve, DC braking, and PI tuning.
Lists common faults, their possible causes, and corresponding solutions.
Helps diagnose common drive symptoms and identify underlying issues.
Details General, Motor, Control Modes, Input/Output, and Start/Stop parameters.
Covers Fault/Protection (F9), PID (FA), and Auxiliary (FB, FC, FE, FP) parameters.
Lists parameters for monitoring drive status and communication settings.
To Next Page